Get instant access to a video series filmed on-site at one of our in-person trainings.
The Curb Depot founder, Ryan Wolfrath, takes you on a full day of curbing, so you can learn how it works from the ground up. Learn the right way to prep, mix, pour, and seal your curb.
Check below to see the five modules included, and what is covered in each module.
Get instant access to almost 2 hours of curbing training videos!
VIEW LESSONS
This course is broken up into five different video modules.
Lessons
Basic Training – Lesson 1

In this lesson you’ll learn about:
- Creating your curb’s shape & design
- Trenching
- Operating a sodcutter
- Mixing concrete
Basic Training – Lesson 2

In this lesson you’ll learn:
- Finding the right concrete consistency
- The best mixing ratio
- Prepping for extruding
- Putting the cable in the machine
- Starting the extruding process
- Sliding the machine
- Troweling
- Lining up the end of your curb with the start of your curb
Basic Training – Lesson 3

In this lesson you’ll learn about:
- Planning out a curb design
- Cutting and pulling sod
- Putting the cable into the plunger
- Mixing
- Adjusting the height of the curbing machine
- Pouring and extruding
- Troweling
- Applying release
- Rolling
- Removing slag
- Texturing
- Stamping
Basic Training – Lesson 4

In this lesson you’ll learn about:
- Curb touchups
- Extruding
- Adjusting curb placement
- Troweling technique
- Stamping hand placement and technique
- How to get an even texture
- Fixing imperfections and mistakes
- Creating different types of styles and designs
Basic Training – Lesson 5

In this lesson you’ll learn about:
- Removing excess release
- Sealing the curb
- How to create an end to the curb
- How to create a tree circle
- Detailing
- Curbing from start to finish