ideas on circle around tree

General information.

ideas on circle around tree

Postby curberboy » Mon May 09, 2016 7:21 pm

best way to make a even circle? was hoping for a little more info here on questions. is the attendance on the board that low or no one wants to share in fear of competition. I am not looking to step on toes or steal anyones work, so please share your info with a newbie, thanks
curberboy
 
Posts: 9
Joined: Mon Apr 18, 2016 8:20 am

Re: ideas on circle around tree

Postby jim c » Tue May 10, 2016 6:55 am

I DON'T INSTALL, MY SON DOES. YOU CAN TIE A STRING AROUND THE TREE, COME OUT AS FAR AS YOU NEED AND FORM A CIRCLE AS YOU MOVE THE STRING, MARKING IT. SOD CUT, DROP THE MACHINE IN THE OUTLINE
SET THE TURN AND THE MACHINE WILL FOLLOW THE OUTLINE.

JIM C
jim c
 
Posts: 70
Joined: Tue Aug 10, 2010 7:09 am
Location: albany, ny

Re: ideas on circle around tree

Postby jcawley3 » Thu Jun 16, 2016 8:32 pm

practice……not sure what machine you are on…. but… I run a tygar…. I measure 42'' make a mark……run string around and out to my mark…. draw circle…. cut… run curb. if you set your wheels as far out as possible but still be able to screw wheels in…. it will pass and line up perfectly…. this will make a 22 foot circle.

also….. when you start, pick up the first foot or so and just feed it back to the machine…this will raise your height where you want it….

Ive been curbing almost 10 years….. and still hate circles…
jcawley3
 
Posts: 136
Joined: Sat Aug 14, 2010 1:57 pm
Location: North Augusta, SC

Re: ideas on circle around tree

Postby curberboy » Fri Jun 17, 2016 7:48 pm

thanks guys, I have a lil bubba
curberboy
 
Posts: 9
Joined: Mon Apr 18, 2016 8:20 am


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest

cron